RadioVision™
How it works:
- PIR Motion Detector Turns receiver on when there is motion under the door
- Using BLE AoA frames, analyzes the path of travel to recognize an Entry or Exit
- Average detection time of 5 seconds
- Easy Integration with Existing BLE Location Systems – sends BLE advertisements with Entry/Exit events
- Unique and Patented DSP algorithms and ML trained on hundreds of thousands of examples
- Works with any BLE 5.1 device that can transmit CTE frames
Enables Key Hospital Use Cases that require 99.9% room accuracy, including:
- Nurse Call Cancel, Patient Engagement, Workflow Optimization, PAR Level Stocking, Hand Hygiene Compliance
A Disruptive Solution the industry has been wanting for 20 years!
- Legacy room accurate solutions use proprietary tech like IR and US - which is expensive and not future proof
- Newer solutions using PoE anchor points to triangulate or trilaterate XY location cannot achieve 99.9% room-accuracy due to multipath and placement errors
TECHNICAL SPECIFICATIONS
BLE Radio 1
- Rx-only radio optimized for AoA CTE frame reception
- 4×4 AoA antenna array
BLE Radio 2
- Rx/Tx radio with full BLE stack for gateway comms
- Omni-directional antenna
- Up to +10 dBm output with coded PHY for long-range link
CPU
- All DSP and ML processing runs locally on the device
- Vector Accelerator for fast real-time processing
Scaling
- Handles up to 50 tags simultaneously
Compatibility
- Works with any BLE 5.1 device that transmits CTE frames
Certifications:
- FCC, Canada, ETSI
- UL and CE
Batteries
- 2 D-Cell Lithium
- 5 years battery life based on 20 crossings per hour
- Optional PoE power (802.3af) for extremely busy doorways
Physical
- Dimensions: 8” x 8” x 1”
- Operating Temperature: 32 to 122 °F / 0 to 55°C
- Dual-zone curtain PIR: Detects doorway motion
Installation
- Easy to install - mounts inside doorway to the ceiling grid.
- Minimal configuration required.
- Supports OTA Firmware Update
